How to Take Care of Your Liquid CPU Cooler?

Technology

In reality, liquid CPU coolers are more difficult to maintain than conventional fan-cooled CPUs. Sure, there are the usual dangers to be aware of– malfunctioning memory sticks, video cards, and so on– but you also have to factor in a whole lot more. Pumps, pipes, and radiators are among the components you won’t find in a typical fan-cooled system. Things that you would not normally have to worry about, but you do not have much of a choice now that you have a liquid CPU cooler. Moreover, there are a lot of different websites from where you can get the best cpu coolers, that is if you are planning to purchase a cpu cooler. Regardless matter how effective your liquid cooler is, if you do not properly maintain it, you will undoubtedly suffer its drawbacks far more than its benefits. Nevertheless, here is How to Take Care of Your Liquid CPU Cooler.

1. VERIFY THAT THERE ARE NO LEAKS ELSEWHERE.

When utilising a liquid CPU cooler, it is critical to keep an eye out for leaks. Although it has been proved that using water to cool your CPU is safe, combining water with electric components can still be dangerous. You would not want a water leak to destroy your perfectly decent components, would you? However, if a leak does occur, there is no reason to worry. Drain the water from your system and make sure everything is dry before plugging it back in. Rushing is your worst enemy here, so take your time reassembling all of the pipes and sealing any leaks you find.

2. DUST THE RADIATOR ONCE IN A WHILE.

Checking the radiator for dust should be done on a regular basis in both open as well as closed loop systems. Radiator fans may become highly dusty over time, which can have an effect on the performance of your system. There are three ways to clean them. One option is to purchase compressed air in a can. This is the way that is most commonly advised for dusting things off. Two, you may manually brush the fins with a gentle brush. The third and riskiest approach is to run them under water to clean them properly, but make sure you dry them entirely before reinstalling them.

3. CHECK YOUR RESERVOIR LEVEL ON A REGULAR BASIS.

Liquid CPU coolers are effective at dispersing heat since water cools much better and quicker than air, but there is a drawback. Do you know what happens to water when it is exposed to high temperatures? It vanishes, that is correct. This is why you should check the level of your reservoir whenever you get the opportunity, just to make sure you are not losing too much water. However, for best effects, you should drain everything and replenish it with a fresh batch of clean water at least twice a year. Unless you use distilled water, you only need to check once a year.

Leave a Reply

Your email address will not be published.