When your basement floods, it is an extremely stressful and upsetting experience. You may not know how to handle the current situation or prevent it from happening again. In addition, you may feel like there’s no way to remedy the situation because of the state of your home. Fortunately, this is not always the case. With the right strategies, a wet basement can become a thing of the past. There are many ways to handle wet basements that don’t involve tearing them apart and rebuilding them from scratch. You can do many things if you have a wet basement – from minor adjustments to complete renovations. The key is knowing what options are available and which will work best for your specific needs and circumstances.
The Importance of Basement Drainage
If you have a wet basement, you first need to look at your home’s drainage system and research wet basement repair costs. Is it blocked? Is it clogged? Is it even there at all? If not, it can be a good idea to install a new one when your basement floods, and the water has nowhere to go. It just builds up until it reaches the top. A good drainage system will allow the water to escape and be redirected to the nearest exit. There are many different types of drainage systems, but they all have one thing in common – they remove water from the basement and redirect it outside. For house exterior information visit: exterior painter Toronto.
Some of these systems are built into your home when it is first built. They are designed to move water away from your home’s foundation and out to the street. Other basement drainage systems will be added later. Depending on your home location, you may need to install a system that will divert water away from your home and into a nearby river or stream.
Repairing Buckled Walls and Leaking Pipes
If your basement is flooding due to buckling walls and leaking pipes, fixing them may be as simple as adding some insulation. If you have leaks in your pipes, you can replace them. If the walls are slumping, you can add support by installing jack posts or a wall brace. If your home is experiencing plumbing issues, you may have to replace the whole system. You can get the assistance of a plumber for this or you can do it yourself. If your basement wall slumps, you can install a wall brace to help support it. This is an easy, do-it-yourself project that shouldn’t take more than a few hours to complete. Wall braces are made from metal and are designed to fit snugly against your basement walls.
Converting to Wet Room Basements
If your basement is built on soil and prone to flooding, you may want to consider converting it to a wet room basement. This big project will likely require you to tear down and rebuild the foundation. But it will be worth it. If you have a large amount of water coming in from a specific area, you can install a sump pump in that area. This will suck the water out of the ground, move it to the basement, and then pump it outside. Another option is installing a French drain at the lowest point of your property (largely because gravity always works in your favor). If you have a large amount of water coming in from a specific area, this is a good way to redirect it.
Installing an earthen berm
An earthen berm is a barrier of earth built around your property’s perimeter. It is often used in areas with high water tables. They are a great way to divert water away from your home’s foundation and send it down to a nearby river or stream. Earthen berms are usually built in a similar way to French drains. You need to dig a trench along the perimeter of your home and line it with gravel or sand. You need to cover the excavation with an earthen berm and leave a small gap for water flow. The most important thing about an earthen berm is that it is built on the highest part of your property. This will ensure the water flows into it instead of flowing towards your home.
Finding the Cause and Fixing It
As we’ve already discussed, there are many different ways to handle a wet basement. If you know the specific problem causing it, there’s a good chance you can find a solution. Earthen berms and French drains are mainly used to divert water away from your home and send it to a nearby river or stream. They are not designed actually to fix the root of the problem. If your basement floods due to a clogged drain or a leaky pipe, you can repair it. It may be a problem to install a sump pump in your basement. You can check it and clean it out. You can’t do much about your basement flooding due to a high water table. The best thing you can do is try to divert the water away from your home. Installing a high earthen berm around your property is a good way to do this.
Conclusion
A wet basement can be a frustrating and expensive problem to deal with. However, it doesn’t have to be a permanent problem. A variety of solutions exist to help deal with a wet basement. When you have a wet basement, you need to start by looking at the drainage system. If it is blocked or clogged, you need to unclog it. If it doesn’t exist, you need to install one. And if that doesn’t work, you need to determine the cause of the problem and try to fix it.
